RT54/RT40
Roadside inspection site in New Jersey
RT54/RT40 is a roadside inspection site in New Jersey where state law-enforcement officers conduct commercial-vehicle inspections under the federal Motor Carrier Safety Assistance Program (MCSAP). Last recorded inspection: Oct 27, 2023. Use this page to see how often the site is active, what violations inspectors most often cite, which carriers come through, and how the out-of-service rate compares to the state average.
Possibly dormant or seasonal
No FMCSA inspections have been recorded at RT54/RT40 in the last 90 days. The site may be seasonal, temporarily closed, or unstaffed. Check with the state DOT or commercial-vehicle enforcement office before relying on current activity levels.
- Name:
- RT54/RT40
- State:
- New Jersey (NJ)
- Total Inspections:
- 0
- Active Since:
- Apr 28, 2023
- Latest Inspection:
- Oct 27, 2023
Ranks 627th by inspection volume in New Jersey.
About This Inspection Site
RT54/RT40 is a roadside inspection location in New Jersey where FMCSA-certified inspectors conduct safety inspections of commercial motor vehicles under the Motor Carrier Safety Assistance Program (MCSAP). from Apr 28, 2023 to Oct 27, 2023 .
Inspections follow CVSA (Commercial Vehicle Safety Alliance) North American Standard procedures and may include weight checks, credential verification, mechanical inspection, hours-of-service compliance review, and hazardous materials documentation checks. Vehicles or drivers that fail critical safety criteria are placed out of service until deficiencies are corrected.
Peer Stations in New Jersey
Stations of similar inspection volume — useful for comparing OOS rates and operating patterns.
Carriers Inspected
Showing 0 of 0 (page 1 of 1)
| Carrier | Inspections ▼ | |||
|---|---|---|---|---|
| No carriers match the current filter. | ||||
How to use station-level data
- Note the station's typical activity hours. Use the activity heatmap on this page to see when RT54/RT40 has historically been most heavily staffed. FMCSA does not publish official hours, so the inspection record is the closest proxy.
- Check what level of inspection typically happens here. The Inspection Level Breakdown shows what mix of CVSA Level I, II, III, IV, V, and VI inspections this site runs. Expect the level-mix at the next visit to look similar.
- Review the most-cited violation codes. Codes that show up most often in the Top Violations table tell you what inspectors at this station focus on — often brake-system, lighting, tire, or hours-of-service items. These are the inspectors' hot buttons.
- Pre-trip your truck against those specific codes. Walk-around the tractor and trailer and physically verify each item the top codes describe. A 5-minute pre-trip aligned to this station's hot codes is far more efficient than a generic checklist.
- Track your own inspection history at /usdot/{your-USDOT}/inspections/. After every inspection, confirm the report shows up on your USDOT profile within 30 days. Disputes (DataQs) must be filed against your own record, not the station's.
Frequently asked questions about RT54/RT40
What kind of inspections happen at RT54/RT40? ▾
How many trucks have been inspected here? ▾
What's the out-of-service rate at this station? ▾
Where exactly is this station located? ▾
When is this station typically active? ▾
What violations are most commonly cited here? ▾
Can I avoid this station? ▾
How does this station compare to others in New Jersey? ▾
About FMCSA inspection stations
FMCSA inspection stations — sometimes called weigh stations, scales, or ports of entry — are the physical points where state law-enforcement officers stop commercial motor vehicles to conduct safety inspections, weight checks, and credential verification. The federal Motor Carrier Safety Assistance Program (MCSAP) funds the inspector workforce; the Commercial Vehicle Safety Alliance (CVSA) defines the inspection-level standards (Levels I through VI). Every report becomes part of FMCSA's national inspection file, which is what TruckCodex mirrors here.
A station's "OOS rate" — out-of-service rate — measures the share of inspections that ended with the vehicle, driver, or both placed out of service. A high OOS rate doesn't necessarily mean the inspectors are stricter; more often it reflects the population of carriers passing through the corridor. A low OOS rate often means the station is on a route used by larger, well-maintained fleets running regular pre-trip programs.
TruckCodex is not affiliated with the FMCSA, MCSAP, CVSA, or any state DOT. Every station record on this site is sourced from the public FMCSA inspection file and refreshed daily. We do not publish staffed hours, schedule changes, or upcoming enforcement details — those would not be public to begin with. For the live status of any specific station, contact the operating state's commercial-vehicle enforcement bureau.
Related
Data sources & freshness
TruckCodex aggregates official public-sector datasets. See the Source registry for dataset-level coverage and the Freshness log for last-import timestamps.
Census, SAFER, SMS, Licensing & Insurance (L&I), roadside inspections, crashes, and authority history.
Vehicle recall campaigns, defect investigations, and consumer safety complaints (SCRS).
Cross-border carrier registry and Canadian recall campaigns where applicable.
TruckCodex is an independent aggregator; it is not affiliated with FMCSA, NHTSA, EIA, or Transport Canada. Always verify compliance-critical information directly with the originating agency.