Roadside Inspection 89378832
Roadside inspection on Oct 27, 2026 in Indiana • Carrier: BASELINE TOWING LLC (USDOT 4397700)
Inspection Details
Key facts from the FMCSA inspection record.
- Inspection #:
- 89378832
- Date:
- Oct 27, 2026
- State:
- Indiana
- Level:
- Level II — Walk-Around
- Type:
- —
- Units inspected:
- 0
- Violations:
- 3
- HazMat:
- No
- Inspection site:
- HEBRON IN
- Carrier (USDOT):
- BASELINE TOWING LLC (4397700)
What this inspection means
3 violations were recorded, but no out-of-service order was issued.
Cited issues fall mainly under Unsafe Driving, with a combined severity weight of 21.
Compared to the median Level 2 inspection nationwide in 2026, this is a slightly above typical result.
Severity context
How mild, normal, or severe was this inspection compared to its carrier, state, and station?
How this compares
National peer benchmarks for inspections at this level.
Units Inspected
Vehicle unit details are pending — typically arrive within a few days.
Vehicle unit details pending
Vehicle unit details (VIN, plate, make/model/year, per-unit OOS flags) are typically available within a few days of the inspection date as the FMCSA unit feed catches up. Check back soon. The inspection summary itself is complete — violations, stations, dates, and overall OOS status are all accurate.
Violations Cited
3 violation(s) recorded against this inspection.
| Code | Description | Severity Wt | BASIC | OOS |
|---|---|---|---|---|
| 392.2-SLLIFTA | State/Local Laws - State tax/International Fuel Tax (IFTA) violation. | 8 | Unsafe Driving | — |
| 392.2-SLLUCR | State/Local Laws - Failure to pay UCR fee. | 8 | Unsafe Driving | — |
| 392.2-SLLTCD | State/Local Laws - Failed to obey a traffic control device - Permanent or Temporary - e.g., safety offical, signal, sign, light, lane marking, other. | 5 | Unsafe Driving | — |
Violation categories (BASICs)
Federal behavior-analysis-and-safety-improvement buckets for the cited violations.
Carrier booking & risk tools
Check booking and risk signals for USDOT 4397700 — tools open pre-filled.