Recall 00V102003 scope
Recall 00V102003
PILLING'S F.R.P. INC • SUSPENSION:FRONT:HUB • reported May 24, 2000 • • 271 units affected
View official record on NHTSA.gov · federal source of truth
- Campaign
- 00V102003
- Manufacturer
- PILLING'S F.R.P. INC
- Component
- SUSPENSION:FRONT:HUB
- Make
- UTILITY
- Model Years
- 1999–2000
- Affected Units
- 271
- Country
- US
- Data As Of
- Apr 5, 2026
What this recall is about, in plain English
VEHICLE DESCRIPTION: VAN-REFRIGERATED/DRY FREIGHT TRAILERS EQUIPPED WITH CONMET PREGREASED TRAILER HUBS AND A TIRE INFLATION SYSTEM. AN OUTBOARD BEARING FAILURE CAN RESULT IN A SEPARATION OF THE HUB ASSEMBLY FROM THE SPINDLE. AUTHORIZED DEALERS ARE INSTRUCTED TO CONVERT GREASED HUBS TO OIL HUBS IF THE TIRE INFLATION SYSTEM IS TO REMAIN ON THE TRAILER.
Synthesized from the NHTSA defect summary, consequence, and remedy fields shown below.
Risk Summary (Consequence)
AN OUTBOARD BEARING FAILURE CAN RESULT IN A SEPARATION OF THE HUB ASSEMBLY FROM THE SPINDLE.
Defect Summary
VEHICLE DESCRIPTION: VAN-REFRIGERATED/DRY FREIGHT TRAILERS EQUIPPED WITH CONMET PREGREASED TRAILER HUBS AND A TIRE INFLATION SYSTEM. THE OUTBOARD BEARING ON THE PREGREASED TRAILER AXLE HUBS USED WITH THE TIRE INFLATION SYSTEMS MAY FAIL DUE TO THE INTRUSION OF CONTAMINANTS THROUGH THE TIRE INFLATION SYSTEM.
Remedy
AUTHORIZED DEALERS ARE INSTRUCTED TO CONVERT GREASED HUBS TO OIL HUBS IF THE TIRE INFLATION SYSTEM IS TO REMAIN ON THE TRAILER. IF THE TIRE INFLATION SYSTEM IS REMOVED, THE HUB MUST BE INSPECTED FOR CONTAMINATION AND CORROSION. THE HUB AND BEARING ASSEMBLY MUST BE REPLACED IF THERE IS EVIDENCE OF CORROSION. IF THERE IS NO EVIDENCE OF CORROSION, LUBRICANT AND SEAL MANITENANCE CAN BE PERFORMED AND THE HUB REINSTALLED.
Key Dates
Affected Vehicles
4 vehicles under this recall
Official Sources & Documents
Links to NHTSA.gov and Part 573 recall reports when available — hosted by NHTSA, not TruckCodex
Documents hosted on nhtsa.gov. Links open in a new tab.
How to Act on This Recall
- Owners: Contact your authorized dealer to schedule the remedy at no cost. Remedy is covered under 49 U.S.C. 30120.
- Fleets: See the Fleet Recall Workflow Guide for the operator workflow to sweep your VIN list against this and other open campaigns.
- Looking up a specific VIN? Check VIN against NHTSA for open recalls on that vehicle.
- NHTSA contact: Vehicle Safety Hotline 1-888-327-4236.
How to verify your vehicle is affected
- Find your VIN. Locate your 17-character Vehicle Identification Number on the lower-left corner of your windshield, on the driver's-door jamb sticker, or on your vehicle registration. The VIN is the only reliable way to confirm whether a specific vehicle falls under a recall — make/model/year alone is not enough.
- Check your VIN on this site. Enter the VIN at /vin/ to see every open recall tied to your specific vehicle, including 00V102003. Our lookup pulls directly from the NHTSA recall database and refreshes daily.
- Cross-reference with the official NHTSA recall search. For a second source of truth, run the same VIN through https://www.nhtsa.gov/recalls. If both this site and NHTSA show the same campaign as open for your VIN, it applies — schedule the repair.
- Contact your dealer if affected. Bring the campaign number, your VIN, and your registration to an authorized dealer for the make. The dealer performs the remedy at no cost. If you've already paid for a related repair, bring the receipt — the manufacturer is required to reimburse pre-recall repairs that addressed the same defect.