Skip to main content
TruckCodex
Hubs

Recall 95V249003 scope

Affected units
5
Vehicles identified
1
Makes involved
1
Model years
1

Recall 95V249003

PILLING'S F.R.P. INC • STEERING:LINKAGES:KNUCKLE:SPINDLE:ARM • reported Dec 22, 1995 • • 5 units affected

Remedy pending

View official record on NHTSA.gov · federal source of truth

Campaign
95V249003
Manufacturer
PILLING'S F.R.P. INC
Component
STEERING:LINKAGES:KNUCKLE:SPINDLE:ARM
Make
UTILITY
Model Years
1996
Affected Units
5
Country
US
Data As Of
Apr 5, 2026

What this recall is about, in plain English

THESE AXLES CONSIST OF A STEEL TUBULAR CENTER SECTION AND FORGED STEEL SPINDLES THAT ARE WELDED TO EACH END OF THE TUBE. THIS CRACK CAN REDUCE THE EFFECTIVE SERVICE LIFE OF THE SPINDLE AND CAUSE THE SPINDLE TO FRACTURE DURING NORMAL VEHICLE OPERATION INCREASING THE POTENTIAL FOR A VEHICLE ACCIDENT. EATON WILL USE PORTABLE ULTRASONIC TESTING EQUIPMENT TO INSPECT EACH SUSPECT TRAILER AXLE.

Synthesized from the NHTSA defect summary, consequence, and remedy fields shown below.

Risk Summary (Consequence)

THIS CRACK CAN REDUCE THE EFFECTIVE SERVICE LIFE OF THE SPINDLE AND CAUSE THE SPINDLE TO FRACTURE DURING NORMAL VEHICLE OPERATION INCREASING THE POTENTIAL FOR A VEHICLE ACCIDENT.

Defect Summary

THESE AXLES CONSIST OF A STEEL TUBULAR CENTER SECTION AND FORGED STEEL SPINDLES THAT ARE WELDED TO EACH END OF THE TUBE. EITHER SPINDLE CAN CONTAIN A CIRCUMFERENTIAL CRACK THROUGH A PORTION OF ITS CROSS SECTION.

Remedy

EATON WILL USE PORTABLE ULTRASONIC TESTING EQUIPMENT TO INSPECT EACH SUSPECT TRAILER AXLE. TRAILER AXLES CONTAINING DEFECTIVE SPINDLES WILL BE REPLACED WITH EQUIVALENT AXLES.

Key Dates

Report Date
Dec 22, 1995
Owner Notification
Unknown
Remedy Available
Unknown

Affected Vehicles

1 vehicle under this recall

Make Model Year
UTILITY TS2CHE 1996

Official Sources & Documents

Links to NHTSA.gov and Part 573 recall reports when available — hosted by NHTSA, not TruckCodex

Documents hosted on nhtsa.gov. Links open in a new tab.

How to Act on This Recall

How to verify your vehicle is affected

  1. Find your VIN. Locate your 17-character Vehicle Identification Number on the lower-left corner of your windshield, on the driver's-door jamb sticker, or on your vehicle registration. The VIN is the only reliable way to confirm whether a specific vehicle falls under a recall — make/model/year alone is not enough.
  2. Check your VIN on this site. Enter the VIN at /vin/ to see every open recall tied to your specific vehicle, including 95V249003. Our lookup pulls directly from the NHTSA recall database and refreshes daily.
  3. Cross-reference with the official NHTSA recall search. For a second source of truth, run the same VIN through https://www.nhtsa.gov/recalls. If both this site and NHTSA show the same campaign as open for your VIN, it applies — schedule the repair.
  4. Contact your dealer if affected. Bring the campaign number, your VIN, and your registration to an authorized dealer for the make. The dealer performs the remedy at no cost. If you've already paid for a related repair, bring the receipt — the manufacturer is required to reimburse pre-recall repairs that addressed the same defect.

Frequently asked questions about recall 95V249003

What does this recall mean for me as a vehicle owner? ▾
Recall 95V249003 means the manufacturer has identified a defect or noncompliance that may affect your vehicle. Repair work is performed at no cost to you under 49 U.S.C. § 30120. You don't have to do anything until you receive an owner notification letter, but you can act sooner if you want — bring this campaign number to your dealer.
Is this recall under remedy yet? ▾
Not yet — as of the last NHTSA refresh on this page, no remedy date is on file. Affected owners should monitor their mail for the manufacturer's notification letter and contact a dealer in the meantime.
How do I find out if my specific VIN is affected? ▾
Run your VIN through our VIN check tool to see all open recalls tied to your specific vehicle, including this one. NHTSA also offers an official lookup at nhtsa.gov/recalls. Both pull from the same federal source.
Who pays for the recall remedy? ▾
The manufacturer pays. Federal law requires the manufacturer to repair, replace, or refund the affected vehicle or component at no cost to the owner — including parts, labor, and reasonable diagnostic time. If a dealer tries to charge you for a recall remedy, contact the manufacturer's customer line first, then NHTSA at 1-888-327-4236.
What if I've already had repair work done that addresses this issue? ▾
Save the receipt. Federal law requires the manufacturer to reimburse you for pre-recall repairs that addressed the same defect, subject to the reimbursement window the manufacturer publishes in its notification letter (typically the first refund period covers repairs going back to the earliest awareness date). Submit the receipt directly to the manufacturer with your VIN and the campaign number.
How do I check the recall status by VIN? ▾
Use our VIN lookup tool — it returns every open recall, including completion status when the manufacturer reports it. The result also links back to each campaign's detail page.
What if this recall isn't fixed and I sell the vehicle? ▾
You're not legally required to complete a recall before selling a used vehicle, but most state titling agencies and many dealers will run a VIN check during the sale. Disclose the open recall to the buyer in writing — undisclosed safety recalls are a common basis for post-sale fraud claims.
Where can I see all recalls for UTILITY TS2CHE 1996? ▾
Browse all UTILITY recalls on this site, or visit the manufacturer's page to filter by year and component.

Related

PILLING'S F.R.P. INC
View all recalls by PILLING'S F.R.P. INC
UTILITY
View all UTILITY models, recalls, and complaints
All Recall Campaigns
Browse all NHTSA safety recalls
NHTSA Complaints
Browse consumer safety complaints