Recall 17V667000 scope
Recall 17V667000
H&H WELDING & REPAIR LLC • EQUIPMENT:RECREATIONAL VEHICLE/TRAILER • reported Oct 20, 2017 • • 1,697 units affected
View official record on NHTSA.gov · federal source of truth
- Campaign
- 17V667000
- Manufacturer
- H&H WELDING & REPAIR LLC
- Component
- EQUIPMENT:RECREATIONAL VEHICLE/TRAILER
- Make
- CROSSROADS
- Model Years
- 2017–2018
- Affected Units
- 1,697
- Country
- US
- Data As Of
- Apr 5, 2026
What this recall is about, in plain English
Keystone RV Company (Keystone) is recalling certain 2018 Crossroads Cruiser and 2017-2018 Crossroads Sunset, Volante, and Zinger recreational vehicles, equipped with Flame King cook tops designed for outdoor use. If the flame of the cook top becomes inverted or is redirected due to a breeze, the corrugated fiber board may burn, increasing the risk of a fire. Keystone will notify owners, and dealers will inspect the corrugated fiber board protector and burner for damage.
Synthesized from the NHTSA defect summary, consequence, and remedy fields shown below.
This recall describes a safety risk and the remedy is still pending. Affected vehicles should be parked or driven only as needed until the manufacturer issues guidance. Always verify directly with the manufacturer or your dealer using the campaign number.
Risk Summary (Consequence)
If the flame of the cook top becomes inverted or is redirected due to a breeze, the corrugated fiber board may burn, increasing the risk of a fire.
Defect Summary
Keystone RV Company (Keystone) is recalling certain 2018 Crossroads Cruiser and 2017-2018 Crossroads Sunset, Volante, and Zinger recreational vehicles, equipped with Flame King cook tops designed for outdoor use. The cook tops have a corrugated fiber board that can burn due to a breeze or an inverted flame.
Remedy
Keystone will notify owners, and dealers will inspect the corrugated fiber board protector and burner for damage. If no damage exists, the fiber board regulator will be replaced. If damage is found on the fiber board, the cook top will be replaced, free of charge. The recall began on November 13, 2017. Owners may contact Keystone customer service at 1-855-226-7496. Keystone's number for this recall is 17-303.
Key Dates
Affected Vehicles
7 vehicles under this recall
| Make | Model | Year |
|---|---|---|
| CROSSROADS | CRUISER | 2018 |
| CROSSROADS | SUNSET | 2018 |
| CROSSROADS | SUNSET | 2017 |
| CROSSROADS | VOLANTE | 2018 |
| CROSSROADS | VOLANTE | 2017 |
| CROSSROADS | ZINGER | 2018 |
| CROSSROADS | ZINGER | 2017 |
Official Sources & Documents
Links to NHTSA.gov and Part 573 recall reports when available — hosted by NHTSA, not TruckCodex
Documents hosted on nhtsa.gov. Links open in a new tab.
How to Act on This Recall
- Owners: Contact your authorized dealer to schedule the remedy at no cost. Remedy is covered under 49 U.S.C. 30120.
- Fleets: See the Fleet Recall Workflow Guide for the operator workflow to sweep your VIN list against this and other open campaigns.
- Looking up a specific VIN? Check VIN against NHTSA for open recalls on that vehicle.
- NHTSA contact: Vehicle Safety Hotline 1-888-327-4236.
How to verify your vehicle is affected
- Find your VIN. Locate your 17-character Vehicle Identification Number on the lower-left corner of your windshield, on the driver's-door jamb sticker, or on your vehicle registration. The VIN is the only reliable way to confirm whether a specific vehicle falls under a recall — make/model/year alone is not enough.
- Check your VIN on this site. Enter the VIN at /vin/ to see every open recall tied to your specific vehicle, including 17V667000. Our lookup pulls directly from the NHTSA recall database and refreshes daily.
- Cross-reference with the official NHTSA recall search. For a second source of truth, run the same VIN through https://www.nhtsa.gov/recalls. If both this site and NHTSA show the same campaign as open for your VIN, it applies — schedule the repair.
- Contact your dealer if affected. Bring the campaign number, your VIN, and your registration to an authorized dealer for the make. The dealer performs the remedy at no cost. If you've already paid for a related repair, bring the receipt — the manufacturer is required to reimburse pre-recall repairs that addressed the same defect.