Recall 01V098002 scope
Recall 01V098002
KING MANUFACTURING INC • WHEELS:HUBCAP/COVER • reported Jul 11, 2001 • • 31 units affected
View official record on NHTSA.gov · federal source of truth
- Campaign
- 01V098002
- Manufacturer
- KING MANUFACTURING INC
- Component
- WHEELS:HUBCAP/COVER
- Make
- SUMMIT
- Model Years
- 2000
- Affected Units
- 31
- Country
- US
- Data As Of
- Apr 5, 2026
What this recall is about, in plain English
VEHICLE DESCRIPTION: TRAILERS EQUIPPED WITH HUBS PROVIDED BY WEBB WHEEL PRODUCTS. THIS CONDITION CAN CAUSE THE ABS SYSTEM TO CYCLE RAPIDLY AND EXTEND STOPPING DISTANCES DURING AN ABS CONTROLLED BRAKE APPLICATION POSSIBLY RESULTING IN A VEHICLE CRASH. DEALERS WILL REPLACE THE HUBS.
Synthesized from the NHTSA defect summary, consequence, and remedy fields shown below.
This recall describes a safety risk and the remedy is still pending. Affected vehicles should be parked or driven only as needed until the manufacturer issues guidance. Always verify directly with the manufacturer or your dealer using the campaign number.
Risk Summary (Consequence)
THIS CONDITION CAN CAUSE THE ABS SYSTEM TO CYCLE RAPIDLY AND EXTEND STOPPING DISTANCES DURING AN ABS CONTROLLED BRAKE APPLICATION POSSIBLY RESULTING IN A VEHICLE CRASH.
Defect Summary
VEHICLE DESCRIPTION: TRAILERS EQUIPPED WITH HUBS PROVIDED BY WEBB WHEEL PRODUCTS. THESE TRUCK TRAILER DISC WHEEL HUBS HAVE DIRECT-MACHINED ANTI-LOCK BRAKING SYSTEMS (ABS), PART NUMBER 2023A. THE ABS TEETH ARE MACHINED INTO THE INNER FACE OF THE HUB BORE, AND THE TEETH ARE MACHINED OFF CENTER FROM THE CENTER OF THE HUB. THE SPEED SENSOR OF THE ABS SYSTEM READS THE TOOTH PATTERN AND SENDS ERRONEOUS SIGNALS TO THE ABS CONTROL UNIT.
Remedy
DEALERS WILL REPLACE THE HUBS. WEBB WHEEL IS CONDUCTING THE OWNER NOTIFICATION AND REMEDY FOR THIS CAMPAIGN. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT WEBB WHEEL AT 1-800-633-3256 OR SUMMIT AT 1-800-437-3729.
Key Dates
Affected Vehicles
1 vehicle under this recall
| Make | Model | Year |
|---|---|---|
| SUMMIT | AND40 | 2000 |
Official Sources & Documents
Links to NHTSA.gov and Part 573 recall reports when available — hosted by NHTSA, not TruckCodex
Documents hosted on nhtsa.gov. Links open in a new tab.
How to Act on This Recall
- Owners: Contact your authorized dealer to schedule the remedy at no cost. Remedy is covered under 49 U.S.C. 30120.
- Fleets: See the Fleet Recall Workflow Guide for the operator workflow to sweep your VIN list against this and other open campaigns.
- Looking up a specific VIN? Check VIN against NHTSA for open recalls on that vehicle.
- NHTSA contact: Vehicle Safety Hotline 1-888-327-4236.
How to verify your vehicle is affected
- Find your VIN. Locate your 17-character Vehicle Identification Number on the lower-left corner of your windshield, on the driver's-door jamb sticker, or on your vehicle registration. The VIN is the only reliable way to confirm whether a specific vehicle falls under a recall — make/model/year alone is not enough.
- Check your VIN on this site. Enter the VIN at /vin/ to see every open recall tied to your specific vehicle, including 01V098002. Our lookup pulls directly from the NHTSA recall database and refreshes daily.
- Cross-reference with the official NHTSA recall search. For a second source of truth, run the same VIN through https://www.nhtsa.gov/recalls. If both this site and NHTSA show the same campaign as open for your VIN, it applies — schedule the repair.
- Contact your dealer if affected. Bring the campaign number, your VIN, and your registration to an authorized dealer for the make. The dealer performs the remedy at no cost. If you've already paid for a related repair, bring the receipt — the manufacturer is required to reimburse pre-recall repairs that addressed the same defect.