Recall 16V585000 scope
Recall 16V585000
TAYLOR MACHINE WORKS, INC. • POWER TRAIN:MANUAL TRANSMISSION • reported Aug 5, 2016 • • 470 units affected
View official record on NHTSA.gov · federal source of truth
- Campaign
- 16V585000
- Manufacturer
- TAYLOR MACHINE WORKS, INC.
- Component
- POWER TRAIN:MANUAL TRANSMISSION
- Make
- PIERCE
- Model Years
- 2015–2016
- Affected Units
- 470
- Country
- US
- Data As Of
- Apr 5, 2026
What this recall is about, in plain English
Pierce Manufacturing (Pierce) is recalling certain model year 2015-2016 Arrow, Dash, Enforcer, Impel, Quantum, Saber, and Velocity fire trucks manufactured June 29, 2015, to June 30, 2016. If the power output cannot be changed, once the fire truck arrives at the scene, it may not be able to pump water to aid in extinguishing the fire, increasing the risk of injury. Piece will notify owners, and dealers will remove the shift unit assembly and replace the clevis pin and retaining rings, free of charge.
Synthesized from the NHTSA defect summary, consequence, and remedy fields shown below.
This recall describes a safety risk and the remedy is still pending. Affected vehicles should be parked or driven only as needed until the manufacturer issues guidance. Always verify directly with the manufacturer or your dealer using the campaign number.
Risk Summary (Consequence)
If the power output cannot be changed, once the fire truck arrives at the scene, it may not be able to pump water to aid in extinguishing the fire, increasing the risk of injury.
Defect Summary
Pierce Manufacturing (Pierce) is recalling certain model year 2015-2016 Arrow, Dash, Enforcer, Impel, Quantum, Saber, and Velocity fire trucks manufactured June 29, 2015, to June 30, 2016. The affected vehicles may be equipped with certain C20 and C21 split-shaft transmissions from Waterous. This transmission sends power to the wheels of an emergency response vehicle or power to an add-on unit such as a water pump used for fighting fires. A component within the shift unit may be damaged and as a result, the operator may not be able to switch the power output.
Remedy
Piece will notify owners, and dealers will remove the shift unit assembly and replace the clevis pin and retaining rings, free of charge. The recall began on September 2, 2016. Owners may contact Pierce customer service at 1-888-974-3723. Pierce's number for this recall is 74B277.
Key Dates
Affected Vehicles
14 vehicles under this recall
Official Sources & Documents
Links to NHTSA.gov and Part 573 recall reports when available — hosted by NHTSA, not TruckCodex
Documents hosted on nhtsa.gov. Links open in a new tab.
How to Act on This Recall
- Owners: Contact your authorized dealer to schedule the remedy at no cost. Remedy is covered under 49 U.S.C. 30120.
- Fleets: See the Fleet Recall Workflow Guide for the operator workflow to sweep your VIN list against this and other open campaigns.
- Looking up a specific VIN? Check VIN against NHTSA for open recalls on that vehicle.
- NHTSA contact: Vehicle Safety Hotline 1-888-327-4236.
How to verify your vehicle is affected
- Find your VIN. Locate your 17-character Vehicle Identification Number on the lower-left corner of your windshield, on the driver's-door jamb sticker, or on your vehicle registration. The VIN is the only reliable way to confirm whether a specific vehicle falls under a recall — make/model/year alone is not enough.
- Check your VIN on this site. Enter the VIN at /vin/ to see every open recall tied to your specific vehicle, including 16V585000. Our lookup pulls directly from the NHTSA recall database and refreshes daily.
- Cross-reference with the official NHTSA recall search. For a second source of truth, run the same VIN through https://www.nhtsa.gov/recalls. If both this site and NHTSA show the same campaign as open for your VIN, it applies — schedule the repair.
- Contact your dealer if affected. Bring the campaign number, your VIN, and your registration to an authorized dealer for the make. The dealer performs the remedy at no cost. If you've already paid for a related repair, bring the receipt — the manufacturer is required to reimburse pre-recall repairs that addressed the same defect.